-
| Availability: | |
|---|---|
| Quantity: | |
The CCW left rotation hydraulic gear pump is a fixed displacement high-pressure gear pump for mobile construction machinery. The floating side plate compensation design effectively reduces internal leakage and maintains stable flow and pressure under fluctuating working loads. The left rotation direction strictly matches the power requirement of specific loader hydraulic systems. Every pump will pass hydraulic bench pressure testing before shipment. Standard mounting flange, spline shaft and oil port layout support direct replacement without extra machining. This heavy-duty hydraulic oil pump is a cost-effective hydraulic power component for loader hydraulic circuits.
✅ Left Hand / CCW Rotation Design:Special counter-clockwise rotation to match original equipment requirements
✅ Floating Side Plate Compensation:Low internal leakage, high volumetric efficiency and stable output
✅ Heavy-duty Cast Iron Pump Body:High rigidity, wear resistance, suitable for harsh construction sites
✅ Precision Heat-treated Alloy Gears:Low vibration, low noise and long service life
✅ Standard Installation Interface:Direct fit replacement, no modification required
✅ 100% Hydraulic Pressure Test:Each unit inspected before packing
✅ Strong Anti-pollution Performance:Adapt to medium-clean hydraulic oil environment
Item | Parameter |
|---|---|
Product Name | Left Hand Rotation Hydraulic Gear Pump |
Pump Type | External Gear Pump |
Rotation Direction | Left Hand Rotation (CCW, counter-clockwise from shaft end) |
Rated Pressure | 20 MPa |
Max Pressure | 25 MPa |
Rotation Speed Range | 600–2400 rpm |
Recommended Hydraulic Oil | Anti-wear hydraulic oil ISO VG32 / VG46 |
Working Temperature | -20℃ ~ +85℃ |
Housing Material | Cast Iron |
Gear Material | Heat-treated Alloy Steel |
Typical Application | Wheel Loader Hydraulic Working System |
Wheel loader main working hydraulic system
Construction engineering machinery hydraulic power source
Heavy material handling mobile equipment
Mining auxiliary hydraulic system
Aftermarket repair and replacement of loader hydraulic spare parts
Hydraulic drive system for off-road machinery
A: Left-hand rotation means the shaft rotates counter-clockwise when you face the pump shaft end. Wrong rotation will result in no oil output and rapid pump damage.
A: Direct replacement is available only if rotation direction, mounting flange, spline specification and oil port layout are fully consistent. Double-check all parameters before purchase.
A: Long-time use, contaminated hydraulic oil, system overpressure and gear surface wear will increase internal leakage and reduce output pressure.
A: ISO VG32 or ISO VG46 anti-wear hydraulic oil is recommended. Dirty or deteriorated oil will accelerate gear and seal wear.
A: Yes, samples are available for quality testing. We also supply right rotation gear pumps, tandem gear pumps and other hydraulic spare parts.
A: 12-month warranty under normal operating conditions. Warranty excludes damage caused by wrong rotation installation, overload, oil contamination and improper operation.