XGA18ACK
| Availability: | |
|---|---|
| Quantity: | |
Product Introduction
Brand new large load XGA18ACK is a mobile articulated boom elevating work platform with compact layout, high obstacle-crossing efficiency, accurate design, powerful drive, and easy operations.
Product Advantage
1. The load capacity of 256kg/350kg is ahead of the meter-level products
2. The length, width and height of the whole machine are relatively small in the industry,and two sets can be loaded into one standard container, which is convenient for transportation;
3. The drivina power is strona the climbina ability reaches 30% and the transfer is convenient for transportation;
4. ∑-type combined boom to improve workefficiency;
5. The turning radius is as low as 5m, and it is flexible and challenging to work in small spaces.
Technical Parameters
| Item | Parameter | |
| Overall dimensions | Length (Storage size) | 7575mm |
| Length (Transport size) | 7575mm | |
| Overall width | 2320mm | |
| Overall height | 2350mm | |
| Work platform dimensions | Length Width Height | 1800x760x1150mm |
| Wheelbase | 2360mm | |
| Maximum working height | 18000mm | |
| Maximum platform height | 16000mm | |
| Maximum working range | 10100mm | |
| Maximum carrying capacity | 256 kg (Without limit)/ 350 kg (With limit) | |
| Luffing range of 1st boom | 0~+65° | |
| Luffing range of 2nd boom | -11~+75° | |
| Slewing angle of platform | 160° | |
| Jib vertical rotation - Downward | 65° | |
| Overall weight | 8600kg | |
| Traveling speed (Under stowed status) | 4.8 km/h | |
| Traveling speed (Lifting or expanding) | 0.6 km/h | |
| Minimum turn radius (Outer side) | 4.7m | |
Product Uses
Construction and maintenance of steel structure buildings
Equipment installation and maintenance in large factories and warehouses
Roof construction and cleaning of sports venues, theaters and airports
• Municipal bridge inspection and street lamp maintenance
• Shipbuilding and maintenance
Product Operate Guide
Before operating the XGA18ACk, one must receive professional training and hold a certificate to work. Before starting the operation, it is necessary to check the condition of the equipment and the surrounding environment to ensure that the ground is solid and flat. The operation is carried out through the intelligent control box on the chassis or platform, and the boom lifting, rotation and driving can be steplessly adjusted using the proportional control joystick. Please note that the load on the platform must not exceed the limit and always keep an eye on the distance from obstacles. The equipment is equipped with safety functions such as tilt protection and emergency descent. In case of danger, press the emergency stop button immediately. After the operation is completed, the equipment should be restored to the driving state and parked in a safe area. For detailed operation, please strictly follow the official instructions.
FAQ
Answer: It adopts an alternating current (AC) drive system and four-wheel drive.
Answer: It supports three steering modes: two-wheel steering, four-wheel steering and crab steering.
Answer: It is equipped with systems such as tilt protection, emergency descent, overload protection, and anti-collision alarm.
Answer: One must undergo professional training and hold a certificate before taking up the position.
Answer: Structural components, hydraulic systems, battery power and safety devices need to be inspected daily.
Answer: It adopts a modular design, with key components easy to maintain and is equipped with an intelligent diagnostic system.