| Availability: | |
|---|---|
| Quantity: | |
The 12VDC / 24VDC 28W solenoid coil adopts high-purity enameled copper wire for dense winding, and is integrally sealed with high-strength thermoplastic resin by vacuum encapsulation. The encapsulation layer can effectively isolate hydraulic oil, dust and humid air to prevent short circuit and winding burnout. It is equipped with standard DIN electrical connector, which is convenient for quick wiring and disassembly. Two voltage versions are available to match different vehicle battery systems: 12VDC for small engineering vehicles and agricultural machinery; 24VDC is the mainstream specification for medium and large loaders and excavators. The rated power is 28W, which provides sufficient electromagnetic thrust while controlling heat generation. Each finished coil is tested for resistance, pull-in force, insulation resistance and sealing before delivery to eliminate open circuit, short circuit and insufficient suction force. It can replace the original coil directly without modifying the valve body. Neutral export packing is available, and custom packaging and private label service are supported for bulk orders. Sample inspection, retail and wholesale orders are all acceptable.
✅ Dual Voltage Optional: 12VDC and 24VDC versions available to meet different equipment power supply systems.
✅ Stable 28W Output Power: Sufficient electromagnetic suction ensures reliable valve switching without weak action.
✅ Fully Encapsulated Sealing Structure: Oil-resistant, dust-proof and moisture-proof, suitable for harsh mobile hydraulic environments.
✅ High-Quality Copper Winding: Low internal resistance, uniform heat dissipation, less prone to burnout under continuous duty cycle.
✅ Standard Interface Design: Compatible with most common hydraulic solenoid valve sleeves, easy to install and replace.
✅ Flexible Order Support: In stock for fast delivery, small trial order acceptable, neutral packing ready for export.
Item | Specification |
|---|---|
Product Name | Hydraulic Solenoid Valve Coil |
Rated Voltage | 12VDC, 24VDC |
Rated Power | 28W |
Winding Material | High Purity Enameled Copper Wire |
Encapsulation Material | Oil Resistant Engineering Plastic / Epoxy Resin |
Connector Type | Standard DIN Connector |
Protection Grade | IP65 |
Insulation Class | Class F |
Working Medium | Hydraulic Oil |
Ambient Temperature Range | -30℃ ~ +50℃ |
Condition | New Aftermarket Spare Part |
Packing | Neutral Export Carton |
Warranty | 12 months under normal working conditions |
This 28W 12/24V DC hydraulic solenoid coil is widely used for mobile hydraulic control systems of construction and agricultural machinery:
Wheel Loaders
Excavators
Skid Steer Loaders
Road Rollers
Agricultural Harvesters and Tractors It serves construction sites, sand and gravel yards, mining areas, farmland operation bases, hydraulic repair workshops and global engineering machinery spare parts suppliers.
Q1: How to choose between 12VDC and 24VDC version?
A1: Please select the coil voltage according to your equipment battery voltage. Do not apply mismatched voltage; overvoltage will quickly burn out the winding, while undervoltage will lead to failure of valve switching.
Q2: What is your warranty policy?
A2: We provide 12-month warranty under normal working conditions. Damage caused by wrong voltage supply, water immersion, oil corrosion, continuous overheating and artificial destruction is not covered by warranty.
Q3: Can I place a sample order for testing?
A3: Yes, sample order is supported. We keep stock and can arrange fast shipment.
Q4: Can you provide custom packaging and private label?
A4: Custom packing and private label are available when the order quantity meets requirements.
Q5: What are the common failure causes of solenoid coils?
A5: The most common reasons are wrong voltage, poor harness contact, valve spool stuck leading to long-time locked-rotor heating, damaged sealing and water/oil ingress. When the coil is hot or not pulling in, check the power supply and whether the valve core is stuck first.