XE235C Full Metal Hydraulic Large Crawler Excavator

Product Introduction

The XE235C's core strengths lie in five key areas: powerful yet efficient performance, robust structural durability, outstanding fuel economy, comfortable and responsive operation, and straightforward maintenance. It sets the benchmark for value in the 23-tonne all-round excavator segment. With ample power, high efficiency, low fuel consumption, and excellent durability coupled with low maintenance requirements, it represents the cost-effective choice for medium-scale construction projects.

Product Advantage

Powerful and Efficient

Genuine Isuzu six-cylinder direct injection engine: CC-6BG1TRP, 128.5kW at 2100rpm, maximum torque 637N·m at 1800rpm. High torque at low revs ensures robust performance under heavy loads.

Intelligent Hydraulic Matching: Dual main pumps 2×246L/min, boom priority + precise flow distribution. Smooth compound movements boost loading/dumping efficiency by approximately 26%.

Exceptional Digging Force: Bucket digging force 176kN, stick digging force 125kN. Effortlessly tackles hard soil and rock excavation.

Robust and Durable Construction

Reinforced Working Equipment: Thickened critical areas on boom/dipper arm, finite element optimisation, new shaft stops for impact and deformation resistance.

Upgraded Undercarriage: Integral forged slewing ring housing, heavy-duty four-wheel track with dual-row track clamps for enhanced stability and extended service life.

C-Type Wear-Resistant Bucket: Rationalised stress distribution and high abrasion resistance, suited for demanding conditions like mining and crushing.

Hybrid Cooling: Parallel water and hydraulic oil cooling systems ensure sustained stability in high-temperature environments, preventing overheating and downtime.

Energy-efficient and fuel-saving, low operating costs

Electronic control optimisation: New controller + intelligent power matching reduces overall fuel consumption by approximately 15%, delivering greater fuel efficiency under identical operating conditions.

Large fuel tank: 400L capacity extends operational range, reduces refuelling frequency, and enhances shift efficiency.

Extended maintenance intervals: Key components require servicing less frequently, lowering maintenance costs and reducing downtime.

Technical Parameters

Product Uses

1. Large-scale earthworks (primary application)

Extensive excavation, dumping and transportation of earth and rock at construction sites

Site levelling, roadbed filling, slope trimming and shaping

High loading efficiency, the ultimate earthmoving machine

2. Municipal infrastructure projects

Urban road widening, demolition of old road surfaces, roadbed construction

Excavation and backfilling for gas, water supply, sewage and cable ducts

Renovation works for pavements, parks, and public squares

3. Property Development / Building Foundations

Excavation for high-rise residential and industrial building foundations

Basement earthworks, pile cap and strip footing excavation

Foundation backfilling and site clearance

4. Mining / Rock Excavation / Crushing Operations

Mountain stripping, quarrying, and crushed stone loading

Combined with breaker attachments for road demolition, rock breaking, and building demolition

Construction of mine access roads and slope stabilisation

5. Hydraulic Engineering & Waterway Works

River dredging, embankment reinforcement, slope protection excavation

Construction of reservoirs, fish ponds, and drainage ditches

Flood control emergency response and dam reinforcement

6. Rural & Township Development

Construction and widening of village roads

Excavation for homestead sites and livestock farm foundations

Agricultural water management, ditch renovation, and land reclamation

7. Attachment-Extended Operations (Multi-Purpose Machinery)

Breaker: Road surface, wall, and rock breaking

Grapple: Timber, scrap material, and straw handling

Auger: Tree planting pits and small pile holes

Ripper: Hard soil and weathered rock breaking

Product Operate Guide

Starting and Preheating

Climb aboard and fasten your seatbelt

Engage the safety lock lever

Turn key to ON → Self-check → Start engine

Idle for 3–5 minutes, observing no fault codes or alarms on the instrument panel

Standard Operating Procedure (Applicable to both excavation and loading)

Positioning

Drive slowly to the work site and come to a complete stop.

Excavation

Lower boom → Retract stick → Tilt bucket to scoop soil smoothly; avoid forceful impact or stalling.

Lifting & Slewing

Raise boom → Slew to unloading position with fluid motion.

Unloading

Extend stick → Tilt bucket outward for complete discharge.

Reset

Swing and retract bucket to commence next cycle.

Travel Operation Guidelines

Speed selection: Switch between high/low gear based on terrain; use low gear for operation, high gear for relocation.

Maintain stability by keeping boom lowered during travel.

Approach slopes head-on; never traverse sideways or climb diagonally.

Reduce speed when turning; avoid abrupt in-place slewing.

During extended relocations, prevent track overheating.

FAQ

1. WHO ARE WE?

XUZHOU SHANGHENG ENGINEERING MACHINERY CO.,LTD is a leading construction machinery exporter,located in Xuzhou city,Jiangsu province where Xuzhou Construction Machinery Group Inc in. We have the domestic agency rights of them more than 10years,based on the advantage of them,we also estabish long-time business with other famous brands.

2. HOW IS YOUR PRICE COMPARED WITH MANUFACTURERS/FACTORIES?

We work as the leading dealers of various leading China construction machinery manufacturers/ factories, and are constantly treated with best dealership price. From numerous comparison and feedbacks from clients, our price is more competitive than the price from manufacturers/factories.

3. HOW IS YOUR DELIVERY TIME?

In general circumstance, we can have an immediate delivery of regular machines for our clients within 7 days, because we have a variety of resources to check machines in stock, locally and nation widely, and to receive machines in timely manner. But for manufacturers/factories, it will take more than 30 days to produce the ordered machine.

4. WHAT IS THE RECOMMENDED REPLACEMENT CYCLE FOR OIL AND FILTERS?

Strictly adhere to the specifications outlined in the Operation and Maintenance Manual. Appropriately shorten the replacement cycle based on the severity of the operating environment (e.g., dusty, high-temperature conditions).

5. HOW TO SELECT THE CORRECT HYDRAULIC OIL AND ENGINE OIL?

Purchase genuine fluids matching the brand, grade, and specifications (e.g., viscosity grade, API/ISO standards) specified in the manual. Never mix different brands or grades.

6. WHAT PRECAUTIONS SHOULD BE TAKEN FOR LONG-TERM EQUIPMENT STORAGE?

Clean the equipment, drain all coolant (or fill with antifreeze), disconnect the battery negative terminal, fully retract all cylinder piston rods and apply rust-preventative oil, and elevate tires to prevent contact with the ground.