Product Description

The XC956 medium heavy-duty wheel loader is developed to deliver high-efficiency work on construction sites, quarries, bulk stockyards and municipal engineering projects. It combines strong power output, sturdy body framework and intelligent control systems, balancing high productivity, fuel efficiency and long-term reliable performance. Fitted with a 170kW high-performance diesel engine and a 2.8 cubic meter large-capacity bucket, it boasts powerful breakout force and efficient loading and hauling capacity, capable of handling sand, gravel, ore, earth and other bulk materials. Its optimized hydraulic transmission plus reinforced frame guarantee steady running under heavy loads, while compact overall dimensions and agile steering make it fit for both wide and narrow work zones. Equipped with a human-centered cab and easy-access maintenance layout, it eases operator fatigue during long shifts and cuts downtime, acting as reliable core equipment for medium and large-scale engineering projects.

Product Advantages

High Power & Low Fuel Consumption: Equipped with a 170kW high-torque turbo diesel engine adopting optimized fuel injection and low-speed high-torque technology. It offers sufficient power reserve for heavy-duty tasks while cutting fuel use by 6% compared with peer models, realizing energy conservation and high working efficiency.

Sturdy & Long Service Life: Reinforced integrated frame and heavy-duty drive axles are manufactured from high-strength alloy steel with overall quenching treatment to boost structural rigidity and impact resistance. The 2.8m³ thickened bucket comes with wear-resistant cutting edges and strengthened bucket teeth to extend service life, suitable for long-time high-intensity operation in harsh working environments.

Flexible & Precise Operation: Refined hydraulic transmission provides sensitive response and smooth movement, allowing accurate control over bucket lifting, lowering and tilting. With a small 5.2m outer turning radius, it can move flexibly inside narrow quarry yards and construction sites to raise overall working efficiency.

Comfortable & Safe Operation Space: Spacious fully sealed pressurized cab complies with international safety standards, fitted with shock-absorbing air suspension seat, automatic cold and warm air conditioning and full 360° panoramic view. Safety setups including safety belt, emergency stop switch and rear-view camera deliver all-round protection and lower operator fatigue.

Easy Maintenance & Multi-Scenario Adaptation: Filters, fuel tank and electrical components are arranged at ground height to simplify daily inspection and maintenance and save labor time. It supports multiple optional attachments such as forks, grapples and rippers, expanding applicable scenes for bulk handling, rock breaking and snow removal.

Product Parameters

表格

Product Applications

Quarry & Mining Auxiliary Works: Ideal for shoveling, loading and transporting rock, gravel and ore inside quarries and small open mines, offering efficient support for aggregate production and mining operations.

Construction Engineering: Used for large-scale earthmoving, foundation excavation and construction material transport in highway, bridge and residential building projects, meeting construction demands of medium and large sizes.

Bulk Material Handling: Applied for loading and unloading bulk goods like coal, cement and grain at ports, logistics yards and industrial warehouses, reducing manual labor and improving handling efficiency.

Municipal & Environmental Projects: Used for urban road construction, waste collection and delivery, greening works and winter snow removal, satisfying diverse municipal operation requirements.

Agriculture & Industrial Works: Matched with optional attachments, it can transport farm supplies, level farmland and clear industrial waste to realize multi-purpose work across various sectors.

Operation Guidelines

1. Pre-Operation Inspection

Check the liquid levels of engine oil, coolant, hydraulic oil and fuel; replenish fluids promptly if insufficient to prevent equipment damage caused by liquid shortage.

Examine tires for wear, bulges or air leakage; adjust tire pressure to standard values when needed. Check wheel bolts for looseness and fasten them tightly.

Inspect the bucket, bucket teeth and connecting pins for looseness, abrasion or deformation; replace damaged parts in time to guarantee loading efficiency and operational safety.

Test cab safety gear including safety belt and emergency stop button, plus lights, horn and rearview mirrors to ensure normal function; clean cab windows for clear sightlines.

Check hydraulic hoses and joints for oil leakage; tighten fittings or replace spare parts if leakage occurs to avoid hydraulic system breakdown.

2. Starting & Operation

Enter the cab and fasten safety belts, adjust seat height and steering wheel position, and confirm all control levers are set to neutral gear.

Insert the key and turn to the "ON" position, wait around 20 seconds for system self-test, and confirm no fault codes appear on the instrument panel.

Press the start button to ignite the engine; keep idling for 3–5 minutes to warm the engine and hydraulic system, avoid immediate heavy-load operation to protect core components.

Manipulate control levers to lift, lower and tilt the bucket; steer via steering wheel, and control travel speed with accelerator and brake pedals.

Avoid sudden acceleration, deceleration and sharp turns during work; operate levers gently to prevent impact damage to hydraulic and structural components.

After finishing work, park the machine on flat ground, lower the bucket fully to the ground, shut down the engine and pull out the key; clean machine surface to clear dust and debris.

3. Safety Notes

Do not exceed the rated 5.3-ton load or 2.8m³ bucket capacity, otherwise structural damage, hydraulic failure or rollover accidents may happen.

Do not operate the loader on slopes steeper than 30°, avoid turning on inclined surfaces, and park on flat ground during stops to prevent sliding.

Keep a minimum safe distance of 8 meters from staff, vehicles and barriers during operation; no personnel are allowed to stand under the bucket or within the machine’s working range.

Cut off engine power before maintenance, inspection or part replacement, and hang warning signs to prevent accidental operation by other workers.

Stop operation under severe weather including heavy rain, strong wind, dense fog and thunderstorms to guarantee personal safety and avoid equipment damage.

FAQ

Q1: What fuel consumption can the XC956 reach under standard working conditions?

A1: Under regular loading and hauling operations, fuel consumption stands at roughly 15–20 L/h; figures will slightly fluctuate based on working load, site environment and operating habits. The fuel-saving mode can cut fuel consumption by an extra 4–6%.

Q2: Can the XC956 work in high-temperature or dusty harsh environments?

A2: Yes. It is fitted with a large high-efficiency radiator and three-stage air filter, adapting to ambient temperatures up to 55°C and heavy dust sites. Its reinforced structure also ensures stable running under harsh working conditions.

Q3: What is the standard warranty period for the XC956 wheel loader?

A3: The standard warranty covers 1 year or 2,000 working hours, whichever comes first. We also provide customized extended warranty services ranging 1–3 years upon customer requests for worry-free usage.

Q4: What attachments are compatible with the XC956 model?

A4: The standard configuration is a 2.8m³ heavy-duty bucket. Optional accessories include a 3.0m³ general bucket, hydraulic cargo fork, waste grapple and rock ripper, which can be swapped according to different working demands.

Q5: What is the cycle for routine maintenance work?

A5: Basic maintenance including oil and filter replacement every 250 working hours; secondary inspection covering hydraulic system check, tire pressure adjustment and component lubrication every 500 working hours; major overhaul containing engine inspection, drive axle maintenance and undercarriage replacement every 2,000 working hours.

Q6: How to handle hydraulic system faults that emerge during operation?

A6: Cut off the engine power supply at once to avoid secondary damage. First check hydraulic oil volume and hose leakage; add hydraulic oil if the liquid level is too low. If leakage or abnormal noise exists, do not restart the machine and contact professional maintenance staff for inspection and repair.