803004035
| Availability: | |
|---|---|
| Quantity: | |
The CBZ2100 left rotation hydraulic working pump (803004035) belongs to CBZ series high-pressure gear pumps. It features floating side plate compensation structure to reduce internal leakage and maintain stable output under fluctuating pressure. The left rotation design strictly matches the original equipment power requirement. All pumps are 100% pressure-tested before shipment. Standard mounting flange and oil port layout support direct replacement without extra machining. This hydraulic oil pump is a cost-effective aftermarket replacement for construction machinery hydraulic systems.
✅ Left Hand Rotation Configuration:Strictly matches original rotation requirement, avoid installation mismatch
✅ Low Internal Leakage:Floating compensation structure, stable flow and pressure
✅ Heavy Duty Cast Iron Body:High wear resistance, suitable for harsh construction site environment
✅ Precision Alloy Gears:Heat-treated gear pair, long service life, low noise & vibration
✅ Direct Replacement Design:Standard installation size, no modification needed
✅ Full Performance Test:Hydraulic bench test one by one before delivery
✅ Strong Anti-pollution Ability:Adapt to medium-clean hydraulic oil working condition
Item | Parameter |
|---|---|
Model | CBZ2100 Hydraulic Working Pump |
Part Number | 803004035 |
Rotation Direction | Left Hand Rotation (CCW) |
Pump Type | External Gear Pump |
Rated Pressure | 20 MPa |
Max Pressure | 25 MPa |
Speed Range | 600–2400 rpm |
Recommended Hydraulic Oil | Anti-wear hydraulic oil ISO VG32 / VG46 |
Working Temperature | -20℃ ~ +85℃ |
Housing Material | Cast Iron |
Gear Material | Heat-treated Alloy Steel |
Application | Wheel Loader Working Hydraulic System |
Wheel loader main working hydraulic system
Construction engineering machinery
Heavy material handling equipment
Mining auxiliary hydraulic equipment
Aftermarket repair & replacement of loaders
Hydraulic power source for mobile machinery
A: Left-hand rotation (CCW) means the shaft rotates counter-clockwise when you face the pump shaft end. It is a critical parameter; wrong rotation will cause no oil output and pump damage.
A: It can be directly replaced if part number 803004035, rotation direction, mounting flange, spline and oil port position are consistent. Please double-check these parameters before purchase.
A: We recommend anti-wear hydraulic oil ISO VG32 or ISO VG46. Dirty, deteriorated or overheated hydraulic oil will accelerate pump wear and seal failure.
A: Main reasons: aging seals, contaminated hydraulic oil, system overpressure, wrong installation, oil shortage or improper rotation direction.
A: Yes, samples are available for quality testing. Custom hydraulic pump models can be supplied according to customer drawings or part numbers.
A: 12-month warranty under normal operating conditions. Warranty excludes damage caused by wrong installation, overload, oil pollution and improper use.