Product Description

The XE200GA is a high-efficiency medium-sized hydraulic crawler excavator, specially designed for municipal engineering, residential construction, water conservancy projects, and road maintenance. It integrates reliable power, intelligent control, and durable structure, balancing operational efficiency, fuel economy, and environmental protection. With an operating weight of 21,200kg and a standard bucket capacity of 0.9–1.0m³, it is powered by a 125kW turbocharged diesel engine, delivering stable power output and strong low-speed torque for various working conditions. Equipped with an electronic-controlled positive flow hydraulic system, it achieves precise flow matching and smooth compound operations, while the EGR+DOC+DPF aftertreatment system meets strict emission standards without urea injection, reducing operational costs. The reinforced chassis and humanized cab ensure long-term reliability and operator comfort, making it a practical and efficient equipment for medium-scale construction operations.

Product Advantages

• Energy-Saving & Environmentally Friendly: Equipped with a 125kW high-efficiency turbocharged diesel engine, featuring optimized fuel injection technology to reduce fuel consumption by 8% compared with similar products. The EGR+DOC+DPF aftertreatment system meets strict emission standards, no urea required, lowering daily operational costs and environmental impact.

• Intelligent & Smooth Operation: Adopts an electronic-controlled positive flow hydraulic system, realizing precise flow matching between engine and hydraulic system, fast response, and smooth compound actions (lifting, swinging, digging) with low shock, improving operation efficiency and comfort.

• Durable & Reliable: Heavy-duty reinforced chassis and track frame are made of high-strength steel, enhancing impact resistance and load-bearing capacity. The wear-resistant bucket with reinforced bucket teeth extends service life, adapting to long-term operation in earthwork, sand, and gravel scenarios.

• Comfortable & Safe: Spacious fully enclosed pressurized cab with FOPS/ROPS certification, equipped with a shock-absorbing air suspension seat, 10-inch touchscreen monitor, and automatic air conditioning. 360° panoramic vision and rearview camera ensure clear observation, reducing operator fatigue and operational risks.

• Easy Maintenance & Versatile: Ground-level access to filters, fuel tank, and hydraulic components simplifies daily inspection and maintenance. Compatible with optional attachments (breaker, grapple, ripper), expanding application scope to meet diverse working needs such as demolition, crushing, and material handling.

Product Parameters

Product Applications

• Municipal Engineering: Suitable for urban road maintenance, pipeline laying, greening construction, and garbage cleaning, adapting to narrow urban workspaces and low-noise requirements.

• Residential & Commercial Construction: Used for foundation digging, earthmoving, and construction material loading in residential buildings, commercial plazas, and small industrial workshops.

• Water Conservancy Projects: Applied to channel digging, pond excavation, and small dam construction, capable of working in wet environments with stable performance.

• Road & Bridge Construction: Used for roadbed digging, slope trimming, and construction waste cleaning in rural highways, urban roads, and small bridge projects.

• Other Scenarios: With optional attachments (breaker, grapple), it can be used for small-scale demolition, rock breaking, and agricultural land leveling, realizing multi-purpose use.

Operation Guidelines

1 .Pre-Operation Inspection

Check the levels of engine oil, coolant, hydraulic oil, and fuel, and supplement them in time if insufficient; check for oil leakage in hoses and joints.

Inspect the track chains, rollers, and idlers for wear, looseness, or damage; adjust the track tension according to working conditions.

Verify the bucket, bucket teeth, and connecting pins for looseness, wear, or deformation; replace damaged parts in time.

Check the cab safety devices (seat belt, emergency stop button), lights, horn, and rearview camera; ensure the 10-inch touchscreen works normally.

Inspect the air filter and DPF for dust accumulation; clean or replace the filter element if necessary to ensure normal engine operation.

2 .Starting & Operation

Enter the cab, fasten the seat belt, adjust the seat height and backrest angle, and confirm the control levers are in the neutral position.

Insert the key, turn to the "ON" position, wait for the system self-check (about 15 seconds), and confirm no fault alarms on the touchscreen.

Press the start button to start the engine, idle for 3–5 minutes to warm up the engine and hydraulic system, avoiding direct heavy-load operation.

Select the appropriate work mode (standard/eco) via the touchscreen; operate the left joystick to control swing and boom lifting/lowering, and the right joystick to control arm expansion and bucket opening/closing.

Use the foot pedals to control travel direction and speed; avoid sudden acceleration, deceleration, or sharp turns to ensure stability.

After operation, park on level ground, lower the bucket to the ground, idle for 2–3 minutes, turn off the engine, pull out the key, and clean the machine surface.

3 .Safety Notes

Do not overload the bucket beyond its rated capacity (1.0m³) to avoid structural damage or rollover accidents.

Do not operate on slopes steeper than 35°; avoid turning on slopes, and park the machine on level ground when stopping.

Keep a safe distance (at least 5 meters) from personnel, vehicles, and obstacles; prohibit personnel from standing under the boom or bucket.

Stop the engine and cut off power before maintenance or part replacement; hang a warning sign to prevent misoperation.

Do not operate in severe weather (heavy rain, strong wind, fog) or flammable environments; avoid operating near power lines.

FAQ

Q1: What is the fuel consumption of the XE200GA under standard working conditions?

A1: Under standard earthwork or construction conditions, fuel consumption is approximately 12–16 L/h, varying slightly with load, operation habits, and environment. The eco mode can further reduce fuel consumption by 5–8%.

Q2: Does the XE200GA require urea for emission control?

A2: No. It adopts an EGR+DOC+DPF aftertreatment system, which meets strict emission standards without urea injection, reducing daily operational costs and avoiding urea-related failures.

Q3: What is the standard warranty period?

A3: The standard warranty period is 1 year or 2,000 working hours (whichever comes first). Extended warranty services (1–3 years) are available on request.

Q4: What attachments are compatible with the XE200GA?

A4: Standard configuration is a 0.9–1.0m³ bucket. Optional attachments include hydraulic breaker (for demolition), grapple (for material handling), ripper (for rock breaking), and quick coupler for easy replacement.

Q5: How often should routine maintenance be performed?

A5: Routine maintenance (oil and filter change) every 250 working hours; minor maintenance (hydraulic inspection, track adjustment) every 500 working hours; major maintenance (engine and hydraulic system overhaul) every 2,000 working hours.

Q6: What should I do if the DPF is blocked?

A6: The touchscreen will display a DPF blockage alarm. First, run the engine at idle for 10–15 minutes to trigger automatic regeneration. If the alarm persists, stop the engine and clean the DPF filter element; contact professional maintenance personnel if necessary.